Document #: 020-17475-00 Revision: E
Page #: 31 of 63
To remove the Micro SD card
Push down on the top of the card gently to release the spring. The card
will pop up for removal.
d)
Close the Control Box door and lock it by rotating the latch 90
⁰ in a
clockwise
direction using a flat-head screwdriver.
Figure 30
: Micro SD Card installation
O.3.5 Fuse replacement:
To change the fuse (see figure 31):
Switch the unit off and unplug it from the external power source.
Unlock control box by rotating the latch counterclockwise using a flat-head
screwdriver.
Open the Control Box door and locate the Fuse holder.
Grip the fuse holder, pull upwards and rotate it 90
⁰
.
Unsnap and open the access door on the side of the fuse holder. The fuse will
now be exposed.
Remove and replace the fuse by pulling the old one out and snapping the new
one into the slot on the access door surface.
Close the access door and squeeze firmly to snap it back in place.
Rotate the fuse holder back into its original position.
Close the Control Box door and lock it by rotating the latch clockwise using a
flat-head screwdriver.
Figure 31
: Fuse replacement
