Document #: 020-17475-00 Revision: E
Page #: 29 of 63
Figure 27
: Frame adjustment elements
O.3.2 Sensor ring replacement:
If replacement of sensor ring is required perform the following steps:
Unlock the cable clamps on the frame and release the sensor ring cable.
Unscrew and unplug the sensor ring connector from the rear panel of the Control
Box.
Slip the sensor ring up and off of the levitator head.
Put the replacement sensor ring over the levitator head.
Connect the sensor ring connector to the rear panel of control box.
Place the sensor cable in the cable clips on the frame and lock them.
Figure 28:
Sensor ring replacement
