Palazzetti Ecofire, Installation, User And Maintenance Manual

Page: 42 / 164

42/164 cod. 00 477 1480 - 12/2012 - Palazzetti - PN - Italy
INSTALLATION
5 INSTALLATION SITE
PREPARATION
5.1 GENERAL INFORMATION
The following paragraphs provide instructions that
must be complied with in order to ensure maximum
™!
The following instructions are however subordinate
to compliance with any national, regional and local
laws and standards in force in the country where
the product is installed.
5.2 SAFETY PRECAUTIONS
Responsibility for work carried out in the place
where the stove is installed lies with the user;
the user is also responsible for making sure the
installation checks are completed.
The user must abide by all local, national and
European safety requirements.
' š
suitable load-bearing capacity.
The stove assembly and dismantling instructions
are reserved exclusively for specialist technicians.
Users should always contact our service centre
to request work to be performed by qualified
technicians.
Before having work performed by other technical
personnel verify their effective technical
competence. Before starting to assemble or
dismantle the stove, the installer must heed the
™™š ™ˆ
A) do not work in adverse conditions;
? š™ j™
working and make sure that personal protective
equipment is in perfectly working order;
C) always wear safety gloves;
D) always wear safety shoes;
E) always use electrically insulated tools;
F) make sure that the area being used for assembly
and dismantling is clear of any obstacles.
5.3 WHERE TO INSTALL THE STOVE
Protect all structures that could burn if exposed to
the heat radiated by the stove.
Wood flooring or floors made with flammable
materials must be protected with a material that
will not burn like, for instance, a 2-3 mm thick sheet
of metal.
\ š
front of the stove.
If there are wooden beams above the stove they
š j!
Leave enough room for maintenance.