Palazzetti Ecofire Adagio, Installation, User And Maintenance Manual

Page: 53 / 136

cod. 00 477 2290 - 04/2015 - Palazzetti - PN - Italy 53
ENGLISH
USE AND MAINTENANCE
12.2.3
&OHDQLQJWKHÀXHJDVFRPSDUWPHQW
7KH ÀXH JDV FRPSDUWPHQW VKRXOG EH FOHDQHG
fortnightly or whenever necessary.
Take out the ash drawer and, using an apposite
ash-hoover, suck up the ash remains in the
compartment of the ash drawer (Fig.12.5).
8VHDÀH[LEOHEUXVKWRFOHDQWKHH[FKDQJHSLSHV
of the combustion chamber (Fig. 12.6).
Remove any possible remains that fall into the
exhaust compartment with the help of an ash
vacuum cleaner.
Reposition the ash drawer.
12.2.4 Cleaning the glass
The stove is provided with an exclusive glass
autocleaning system which reduces the upkeep
frequency.
Nevertheless in the long run, according to the
work conditions and the kind of pellet used, it is
necessary to clean the glass manually.
This is done using a damp cloth or moistened
paper passed through the ash
(Fig.12.7) .
5XEXQWLOWKHJODVVLVFOHDQ6SHFL¿FGHWHUJHQWVIRU
stove glass can also be used.
Never clean the glass while the stove is operating
and never use abrasive sponges.
Do not wet the door gasket as this may be
damaged.
12.2.5 Cleaning
WKHÀXH
This should be performed at least twice a year, at
the start of and half-way through winter, and in any
case whenever necessary.
If there are horizontal sections, check for and
remove any accumulated ash and soot before
WKHVHEORFNWKHÀRZRIÀXHJDV
If not cleaned correctly, the stove may not operate
properly, with problems including:
‡
poor combustion;
‡
blackening of the glass;
‡
blockage of the burn pot by ash and pellets;
‡
accumulated ash and excessive fouling of the
heat exchanger, with a consequent decline in
HI¿FLHQF\
12.2.6 Cleaning the outside of the stove
The outside of the stove must only be cleaned
using a dry, non-abrasive cloth.
Do not use detergents and never clean when the
stove is hot.
12.2.7 Grid fan cleaning
$JULGLV¿[HGDWWKHEDVHRIWKHVWRYHWRSURWHFWWKH
fan. At least once a week clean this grid by taking it
out by unscrewing the front screw (Fig.2.8).
¿J
¿J
¿J
¿J