Palazzetti Ecofire Adagio, Installation, User And Maintenance Manual

Page: 50 / 136

50 cod. 00 477 2290 - 04/2015 - Palazzetti - PN - Italy
USE AND MAINTENANCE
a) Use the arrow buttons to go to the setup menu and then press ;
b) Use the button to select the password “7” and then press
WRFRQ¿UP
c) Select submenu
[7]
DQGFRQ¿UPE\SUHVVLQJ
.
d) Set one of the following values using the buttons:
Eco
ĺ
“Eco Mode” function enabled
Off
ĺ
“Eco Mode” function disabled
e) Press
WRFRQ¿UPWKHVHWWLQJV
10.3 RESTART DELTA FUNCTION
The Restart delta is the number of degrees centigrade below the switch-off temperature at which the stove
switches on again automatically. For example, if the stove is set to switch off at 20°C (Eco Mode active) and
“Restart delta” is set to 4°C, the stove will switch on again when the temperature measured is less than or equal
to 16°C.
To set the restart delta value:
a) Use the arrow buttons to go to the setup menu and then press ;
b) Use the button to select the password “7” and then press
WRFRQ¿UP
;
c) Select submenu
[8]
and press
WRFRQ¿UP
d)
7KHYDOXHZLOOÀDVKFKDQJHLWXVLQJWKH
and buttons (
0,5 ... 5,0
°C);
e) Press the
EXWWRQWRFRQ¿UPWKHVHWYDOXH
10.4 AUTONOMY FUNCTION
7KLVIXQFWLRQLVXVHGWRGLVSOD\WKHQXPEHURIKRXUVRIRSHUDWLQJDXWRQRP\UHPDLQLQJEHIRUHKDYLQJWRUH¿OO
with pellets. Use the arrow buttons to move to the symbol and display the estimated operating hours before
KDYLQJWRUH¿OOZLWKSHOOHWV7KHDXWRQRP\LVFDOFXODWHGDFFRUGLQJWRWKHRSHUDWLQJSDUDPHWHUVVHWDWWKDWPRPHQW
on the stove.
The estimated values are quite reliable, as long “
FULL ´LVVHOHFWHGDQGFRQ¿UPHGZKHQHYHUUH¿OOLQJWKHVWRYH
completely. “Lo” indicates the reserve fuel level.
10.5 REFILL FUNCTION
7KLVIXQFWLRQLVXVHGWRWHOOWKHVWRYHWKDWWKHKRSSHULVEHLQJ¿OOHGZLWKSHOOHWV
In this way, the stove can estimate, based on the operating parameters, how many hours of autonomy remain
EHIRUHKDYLQJWR¿OOWKHKRSSHUZLWKSHOOHWVDJDLQ
$IWHUKDYLQJFRPSOHWHO\¿OOHGWKHSHOOHWKRSSHU
a) Use the arrow buttons to move to the fuel icon and press ente .
b) Use the buttons to select “
FULL
” and press enter .
To disable this function, select “
OFF
” instead of “
FULL
”.
10.6 RESTARTING AFTER A POWER FAILURE
In the event of power failures, the stove will switch back on automatically, checking the safety conditions, when
power returns.
10.7
³/2&..(<3$'´)81&7,21
7KLVIXQFWLRQLVXVHGWRGLVDEOHWKHXVHRIWKHFRQWUROSDQHODQGDYRLGDFFLGHQWDOPRGL¿FDWLRQV
To enable/disable the function:
a) Use the arrow buttons to go to the setup menu and then press ;
b) Use the button to select the password “7” and then press
WRFRQ¿UP
c) Select submenu
[10]
DQGFRQ¿UPE\SUHVVLQJ
.
d) Use the buttons to set one of the following values:
³
Off
´
Lock keypad disabled
³
Lo
´
Only the on/off button is enabled
³ Hi ´
Lock keypad enabled
e) Press
WRFRQ¿UPWKHVHWWLQJV