31
1-2020
Translation
Fig. 22
9.12
Change of the hydraulic oil
The normal hydraulic oil volume is 80 litres. In professional use, the oil volume can be
120 litres.
The quality of oil should be ISO VG 32, e.g. Univis 32, SHELL Tellus 32, NESTE
HYDRAULI 32 or equivalent.
For continuous operation under warm conditions, use ISO VG46.
If a machine powered by electric motor is operated in temperatures below -15 degrees,
it is recommended that a less viscous hydraulic oil be used, e.g. ISO VG 22S multi-
grade oil or synthetic hydraulic fluid, because a machine with electric drive works at full
speed right from the start of operation
Observe particular cleanliness during the oil change, because the flawless operation of
the machine is highly dependent on the purity of the oil.
9.13
Lubricating the machine: refer to the Maintenance Schedule
Blade beam bearings, 6 nipples, Fig. 23.
Nipples on the roller bearings of the shaft, 2 pcs.
Spherical bearings on the operating levers for the blade.
Log-stop shaft, Fig. 25.
Clamp bearings 2 pcs.
Cylinders with a grease nipple.
Figs. 23 and 24