INSTALLATION INSTRUCTIONS
M-1753 11-21-07
GENERAL INFORMATION
Find the mounting kit diagram and parts list for the kit you have received. Study the
diagram and familiarize yourself with the names of the various parts. This knowledge will assist
you in understanding these instructions.
Read these instructions carefully before attempting to mount the auger.
READ AND UNDERSTAND ALL SAFETY INFORMATION PRIOR TO
MOUNTING YOUR AUGER.
QUICK ATTACH MOUNTING ASSEMBLIES
(Includes Skid Steer Loader Mounts.)
1.
Remove the bucket or other attachment from the prime mover quick attach mechanism.
2.
Attach the quick attach mounting bracket to the prime mover quick attach mechanism,
as per manufacturer’s recommendations.
3.
Attach the swivel (#23835) to the quick attach mounting bracket with pin (#23839) pro-
vided. Secure the pin in place with safety pin (#10040).
4.
If your mounting bracket is designed for the installation of a cradle, bolt the cradle to the
bracket using the .50” UNC X 2.00” capscrews, lock washers and hex nuts provided.
5.
Install the drive unit to the swivel using the pin provided with the drive unit assembly.
6.
Install the auger to the drive unit with the bolt and nut provided with the drive unit as-
sembly.
7.
Refer to the
“HYDRAULIC SYSTEM HOOK-UP”
section in this manual for hydraulic
connection instructions and recommendations.
BACKHOE AND EXCAVATOR “PENDULUM” MOUNTING ASSEMBLIES
1.
Remove the bucket from the dipper arm and curl cylinder pin connections. The dipper
arm pin will be used to attach auger pendulum mounting to the dipper arm. Curl cylinder
pin will not be required for auger installation.
2.
Attach the pendulum mounting (all types) to the dipper using the dipper arm pin re-
moved from the bucket in Step #1. Secure the bucket pin as per prime mover manufac-
turer’s recommendation.
75623
11
