User’s Manual
72
Figure 53: Clip-Copy screen.
You can search video from the first to last recorded images, or you can set the start and stop times and dates.
Highlight the box beside
From
and press the (Play/Pause) button to toggle between On and Off. When set to Off, you
can enter a specific Date and Time. When set to On, the search will be from the first recorded image. When highlighting
and pressing the
button the bookmark list displays and the bookmark point you selected will be the starting date
and time.
Highlight the box beside
To
and press the button to toggle between On and Off. When set to Off, you can enter a
specific Date and Time. When set to On, the search will be from the last recorded image. When highlighting and
pressing the
button the bookmark list displays and the bookmark point you selected will be the ending date and time.
Highlight the box beside
Channels
and press the button. You can select the cameras that you would like to include
in your video clip.
Highlight the box beside
Password
and press the button. A virtual keyboard appears allowing you to enter the
password for reviewing the video clips.
Highlight the box beside
Dest.
and press the button. You can select the storage device on which you would like to
record the video clip. You can choose from
Internal DVD RW
and
USB Storage
.
CAUTION: The USB device for clip copy must be FAT 16 or FAT32 format.
NOTE: While copying video clips on the DVD RW, the recording speed might decrease.
While copying video clips on the DVD RW, the DVR will stop archiving video data until clip copy is finished.
When the error message “Firmware update of the optical drive is required” displays, update the firmware
of the installed DVD RW drive. Please follow the instructions described in
Chapter 3 – Configuration –
System Setup
section.
The DVR automatically assigns a file name to the video clip. However, you can give the video clip file a different name.
Highlight the box beside
File Name
and press the button. A virtual keyboard appears. Enter a file name for the
video you are backing up and select
Close
. The DVR will automatically add the camera number (for example “01”)
and “.exe” to the file name.
NOTE: When naming a file, you cannot use the following characters: \, /, :, *, ?, “, <, >, |.
Highlight
Include Text-In Data
and press the button. This will toggle between On and Off. When this feature is
On, you can include text-in data when copying video if the video was recorded with text-in data.
Highlight
Verify After Burning
and press the button. This will toggle between On and Off. When this feature is
On, you can verify that the data is written on the DVD RW properly.
Highlight
Use Site Info
and press the button. This will toggle between On and Off. When this feature is On, you
can add the site information to the file name for the video you are backing up.
NOTE: When the site information is added to the file name, some special characters (\, /, :, *, ?, “, <, >, |) in the
site information will be converted to “_”.
