User’s Manual
56
Setup
Selecting (Setup) in the Live Monitoring menu enters the Main Setup screen. Refer to
Chapter 3
─
Configuration
for detailed descriptions of system setup.
Status
Selecting (Status) in the Live Monitoring menu allows you to check the status of the DVR’s system, inputs and storage.
Refer to the following
Status Monitoring
section for details.
NOTE: Selecting
Status
will only be enabled for a user who has
System Check
authority.
Active Cameo Mode
You can enter the Active Cameo mode by selecting
Edit Group
from the Live Monitoring – Camera menu or pressing
and holding the
CAMEO
button for three seconds or longer in any multi-view format. The yellow outline surrounding
the video indicates the active cameo, and pressing the arrow buttons moves the active cameo. Pressing the (Play/
Pause) button exits the Active Cameo mode. Selecting
Exit Group Edit
in the cameo menu displayed when pressing
the
CAMEO
button also exits the Active Cameo mode. The active cameo mode will remains in effect for 15 seconds
if there is no further operation.
In active cameo mode, press the button for the camera you want to display in the active cameo. After setting the camera
number to active cameo, the DVR moves the active cameo to the next cameo. When the camera number exists on the
current screen, the active cameo is changed with the existing camera number. When the camera number does not exist
on the current screen, the active cameo is replaced by the camera number. You can change the screen layout in this way.
Zoom Mode
You can enlarge an area of the video by pressing the
ZOOM
button. For a few seconds after pressing the
ZOOM
button,
a rectangle displays on the screen. A rectangle shows the area that will be enlarged. You can move the rectangle around
using the arrow buttons. Pressing the (Play/Pause) button in the Zoom mode enlarges the area in rectangle. Exit
the Zoom mode by pressing the
ZOOM
button. While in the Zoom mode, the icon displays if
Zoom
is selected in
the Display setup screen (OSD tab).
PTZ Mode
If a user who has
PTZ Control
authority logs into the system, the user can control PTZ cameras. The DVR will control
cameras with Pan, Tilt and Zoom capabilities. Press and hold the
PTZ
button for three seconds or longer to display
the PTZ camera menu and enter the PTZ mode, and press the button again to exit the PTZ mode.
Select the PTZ camera you wish to control by selecting it from the menu. The icon displays on the PTZ camera screen.
To use the front panel buttons, press the
Left
and
Right
arrow buttons to pan left and right. Press
the
Up
and
Down
arrow buttons to tilt the camera up and down. Press the button to zoom in,
and press the button to zoom out. You can use the and buttons to focus the image.
You can establish preset positions for PTZ cameras. Press the to establish Presets.
You can quickly move PTZ cameras to Preset positions. Press the to view an established camera
Preset position.
Figure 41: PTZ Select Camera menu.
