Digital Video Recorder
69
Highlight the box beside
From
and press the button to toggle between On and Off. When set to Off, you can enter
a specific Date and Time. When set to On, the search will be from the first recorded image. When highlighting and
pressing the
button the bookmark list displays and the bookmark point you selected will be the starting date and time.
Highlight the box beside
To
and press the button to toggle between On and Off. When set to Off, you can enter a
specific Date and Time. When set to On, the search will be from the last recorded image. When highlighting and
pressing the
button the bookmark list displays and the bookmark point you selected will be the ending date and time.
Highlight the box beside
Type
and press the button. You can select between
Motion Search
and
Museum Search
.
Motion Search
detects motion in the defined area.
Museum Search
detects if a defined object has moved.
Highlight the box beside
Zone
and press the button. An image from the video appears with a grid overlaid. You
can turn sensor blocks On and Off to define the area of the picture in which you want to search for motion.
NOTE: Defining the area of the image in which you want to search for motion is nearly identical to setting up the
DVR for Motion. Please refer to
Motion Screen
in
Chapter 3 — Configuration
for more detailed instructions
on setting up the detection blocks.
When setting the Museum Search Zone, the zone should be placed inside of the border line of the target
object. If the selected block is placed on the border line, the sensitivity of the Museum Search may decrease.
The zone should be placed or focused on the centre or, at least, within the outline of targeted object.
Highlight the box beside
Sensitivity
and press the button. You will be able to select from
1
(low sensitivity) to
5
(high sensitivity).
Highlight the box beside
Min. Blocks
and press the button. You will be able to set the number of sensor blocks that
must be activated.
Once you set your desired search conditions, highlight
Search
and press the button to display the search results in
the
Motion
Search
screen. Selecting
Cancel
exits the screen without saving the changes.
When you search for motion events of another camera, you will be asked whether or not you want to delete the previous
search results from the list.
Text-In Search
Figure 51: Text-In Search screen.
The DVR maintains a log of each time there is Text Input. The
Text-In Search
screen displays this list. Use the arrow
buttons to highlight the event for which you would like to see video.
