16-Channel Digital Video Recorder
19
9. Click the
Set up Callback…
button, and set up the callback function. The DVR can be set up to notify the target
server running the SmartBase when certain events occur.
10. Move to
Use Callback
, and check the box to enable the callback function.
NOTE:
When using the callback function with modem connections, check the
Use Modem
box and then select
the installed modem to use. Also, the dial-up server should be running on the target server to be notified, and the
IP address of the server should be set as
10.10.10.10
. See
Appendix 4 – Network Sestup (Modem)
for details.
11. Move to
Center
, and enter the IP address of each server. A maximum of three servers can be set.
NOTE:
When selecting the
Use Modem
, enter the telephone number of the target sever instead of the IP
address.
12. Move to
Retry Counts
, and enter the number of times you would like to DVR try contacting the server if the
connection fails.
13. Move to
When
, and select the target event. The DVR will call when the selected events occur. Multiple
selections are available. You can save your changes by clicking the
OK
button. Selecting
Cancel
exits the
Set
up Callback
dialog box without saving the changes.
NOTE:
Callback messages will be displayed on the system status window of the target server. They include
event type, event detection time, and system location entered during the
System
setup.
Summary of Contents for PDR16-PC
Page 1: ......
Page 2: ...User s Manual ii ...
Page 6: ...User s Manual vi ...
Page 60: ...User s Manual 54 ...
