RVSG-4014 User’s Manual
33
Field
Description
Traffic Class Name
Enter a name for this traffic class.
Rule Order
Select a rule order for this traffic class.
Rule Status
Select to enable or disable this traffic class.
Class Interface
Select an interface for this traffic class to apply.
Ether Type
Select the Ether type from the drop-down list.
Source MAC
Address/Mask
Enter the MAC address and the mask of the computer where
packets are coming from.
Destination MAC
Address/Mask
Enter the MAC address and the mask of the computer where the
packets will be sent to.
Assign
Classification
Queue
Select the classification queue for the traffic class.
Mark DSCP
Select the DSCP to mark. Different markers representing different
grades of service placed on various packet streams to be
recognized by the router for route purposes.
Mark 802.1p Priority
If 802.1q was enabled on WAN, then select a value between 0-7.
Tag VLAN ID
Enter a VLAN ID for the packet to tag.
6.8 Routing
6.8.1 Default Gateway
This page allows you to select a preferred WAN interface to be the system’s default gateway.
6.8.2 Static Route
This page allows you to add the routing table. A maximum of 32 entries can be configured.
Summary of Contents for RVSG-4014
Page 24: ...RVSG 4014 User s Manual 21 ...
Page 44: ...RVSG 4014 User s Manual 41 ...
