Packet Force RVSG-4014, User Manual

Page: 58 / 81

RVSG-4014 User’s Manual
55
7.3 MAC Filter
This function allows you to manage whether a wireless client is allowed to access the RVSG-
4014 or not based on the MAC address of device.
Select the
MAC Restrict Mode you want to use and then click Add to add the MAC address
to the wireless MAC address filters.
To configure the MAC filter, follow the steps below:
1.
Select the MAC Restrict Mode you want to use and then click Add to configure the filter
based on MAC address.
2.
Enter the MAC address to the wireless MAC address filters. Then click Save/Apply .
Field Description
MAC Restrict Mode Select to disable, allow or deny the access of RVSG-4014 based
on the client’s MAC address. The format of MAC address can be:
xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx.
7.4 Wireless Bridge
This page allows you to configure the RVSG-4014 as a bridge. Wireless bridge feature
provides a wireless link between WLAN segments to extend the coverage range. If configure
the RVSG-4014 to bridge mode, then Access Point features is disabled.
In this next screen you can select the mode, either access point or wireless bridge that you
want the router to be in. In the screen below, Bridge Restrict is enabled, therefore you see the
Remote Bridges MAC Address fields. If Bridge Restrict is disabled, then there is nothing left to
do afterwards. Click
Save/Apply to continue.