Packet Force RVSG-4014, User Manual

Page: 43 / 81

RVSG-4014 User’s Manual
40
Field Description
Group Name Enter a name for this group.
WAN Interface used in the
grouping Select a WAN interface used in this grouping fro the
drop-down list.
Grouped LAN Interfaces
Select interfaces from the Available LAN Interfaces list
and use the arrow buttons to map them to the Grouped
LAN Interfaces list.
Available LAN interfaces These are the available LAN interfaces on RVSG-
4014.
Automatically Add Clients with
the following DHCP Vendor IDs Enter (add) support to automatically map LAN
interfaces to PVC’s using DHCP vendor ID (option 60).
The local DHCP server will decline and send the
requests to a remote DHCP server by mapping the
appropriate LAN interface. This will be turned on when
Interface Grouping is enabled.
IMPORTANT! If a vendor ID is configured for a specific client device, you have to reboot the
client device attached to the modem to allow it to obtain an appropriate IP address.
6.14 IPSec
This page shows the IPSec Tunnel connection.
Click
Add New Connection to add a new IPSec Tunnel connection. Enter the setting for
IPSec connection and then click Save/Apply .