Page 8
SKU 95156
For technical questions, please call 1-800-444-3353.
MAXIMUM OIl lEVEl
MInIMUM OIl lEVEl
OIl dIPStIcK
(30)
FIGURE A
2.
Clean the Oil Dipstick (30). Then screw the Dipstick fully back into the Dipstick
Hole. Unscrew and remove the Oil Dipstick again, and observe the level of
engine oil on the Dipstick. The oil level should appear between the
“MInIMUM”
and
“MAXIMUM”
indicator marks on the Oil Dipstick.
(See Figure A.)
If necessary, continue adding engine oil, while re-checking the Oil Dipstick (30),
3.
until the oil level reaches the
“MAXIMUM”
indicator on the Oil Dipstick.
do not
exceed the “MAXIMUM” indicator mark on the Oil dipstick. (See Figure A.)
When finished adding engine oil, carefully screw the Oil Dipstick (30) back into
4.
the Dipstick Hole.
(See Figure A.)
Fill the Fuel tank:
Prior to first using the Pressure Washer, the Fuel Tank (102)
1.
MUSt
be filled with
FRESH
unleaded
gasoline.
FUEl tAnK
(102)
FUEl cAP
(99)
FIGURE b
EnGInE POWER SWItcH
(86)
Only USE
FRESH
UnlEAdEd FUEl.
2.
To do so, remove the Fuel Cap (99) and fill the Fuel Tank (102) with unleaded
gasoline. Then, replace the Fuel Cap. Thereafter, check the Fuel Tank (102) for
the amount of unleaded gasoline. When necessary, refill the Fuel Tank.
(See Figure b.)
3.
WARNING! Never attempt to fill the Fuel Tank (102) when the Engine is
running.
