Page 7
SKU 95156
For technical questions, please call 1-800-444-3353.
UnPAcKInG
When unpacking, check to make sure all the parts shown on the
Parts lists on
pages 16 and 17
are included. If any parts are missing or broken, please call Harbor
Freight Tools at the number shown on the cover of this manual as soon as possible.
ASSEMbly InStRUctIOnS
WARnInG!
Always make sure the Power Switch of the Engine is in its
“OFF”
posi-
tion prior to performing any service, maintenance, or cleaning of the Pressure
Washer or Engine.
Attach the top Portion Of the Frame:
Insert the lower portion of the Handle (203) into the Frame (195). Align the
mounting holes in the Handle with the mounting holes in the Frame. Then secure
the Handle to the Frame, using two Bolts (190) and two Nuts (191).
(See Assy. diagram.)
Add Engine Oil:
IMPORTANT!
Prior to first using the Pressure Washer, the Engine
MUSt
be filled with
a high quality 15W-40 SAE grade engine oil.
To do so,
1.
unscrew
and remove the Engine Oil Dipstick (30). Pour approximately
1 quart of engine oil into the Dipstick Hole.
Do not overfill. (See Figure A.)
People with pacemakers should consult their physician(s) before use. Electro-
10.
magnetic fields in close proximity to heart pacemaker could cause pacemaker
interference or pacemaker failure. Caution is necessary when near engine’s
magneto or recoil starter.
The warnings and precautions discussed in this manual cannot cover all possible
11.
conditions and situations that may occur. It must be understood by the operator
that common sense and caution are factors which cannot be built into this prod-
uct, but must be supplied by the operator.
SAVE tHESE InStRUctIOnS
