Page 10
SKU 95156
For technical questions, please call 1-800-444-3353.
Attach the Spray Gun:
HIGH PRESSURE GUn
(199)
HIGH PRESSURE HOSE
(198)
SPRAy WAnd
(202)
nOZZlE
(200)
tRIGGER
(201)
FIGURE d
SAFEty lOcK OFF lAtcH
1.
Connect the Spray Wand (202) section to the High Pressure Gun (199). The
Spray Wand is connected by pushing in and turning clockwise until tight.
(See Figure d.)
Connect the High Pressure Gun (199) to the High Pressure Hose (198) by screw-
2.
ing the threaded connector of the Gun into the Hose.
(See Figure d.)
Spray nozzle Selection:
The Pressure Washer is equipped with four Spray Nozzles (200), each designed
1.
for a specific use.
(See Figure d.)
0° High pressure (REd):
2.
The water stream discharged from this Nozzle (200)
is very aggressive. Use with extreme caution to prevent damage to the surface
being cleaned and to avoid injury to people and animals.
(See Figure d.)
15° High Pressure (yEllOW):
3.
This is the Nozzle (200) used for most cleaning
applications. It provides wide coverage and a powerful water stream.
(See Figure d.)
25° High Pressure (WHItE):
4.
This Nozzle (200) is used for cleaning with a wider
coverage over a larger area with a powerful water stream.
(See Figure d.)
40° low Pressure (blAcK):
5.
Provides low pressure spray and a wide cover-
age. Use primarily when operating the chemical injector to apply chemicals.
(See Figure d.)
