Paccar PX 8 Page 64 Operator'S Manual Download | Manualshive

Page: 64 / 94

background image

Maintenance Specifications

– 58 –

Y53-1030A 12/09

PACCAR

Filter Specifications

General Information

Fleetguard filters are standard on new PACCAR engines.
PACCAR recommends their use.

Fleetguard products meet all PACCAR test standards to pro-
vide the quality filtration necessary to achieve the engine's
design life. If other brands are substituted, the purchaser
should ensure the filter specification meet or exceed the
Fleetguard specifications.

PACCAR can not be responsible for problems caused by
non-genuine filters that do not meet PACCAR performance or
durability requirements.

NOTE: An LF9009 lubricating oil filter must be used.
A venturi type lubricating oil filter must be used in
order to benefit from the bypass filtration section of
the lubricating oil filter. Do not use an LF3000 lubri-
cating oil filter. Engine durability will be reduced by
using the wrong lubricating oil filter.

Filter Part Numbers

Lubricating Oil Filter
Fleetguard Part Number

LF9009

Fuel Filter (primary, pressure side)
Fleetguard Part Number

FF5636

Fuel Filter (secondary, suction side, with
water-in-fuel sensor)
Fleetguard Part Number

FS1065

Crankcase Breather Element
Fleetguard Part Number

CV5060300

Aftertreatment DEF
Dosing Unit Filter

2880298

«
...
62
63
64
65
66
...
»

Summary of Contents for PX 8































































































Reviews:

No comments

Related manuals for PX 8

Brand: ZF Pages: 28

Brand: ZIEHL-ABEGG Pages: 84

Brand: Nanni Pages: 67

Brand: EuroLite Pages: 19

Brand: YOODA Pages: 6

Brand: Flux Pages: 28

Brand: Aerovent Pages: 16

Brand: Power Fist Pages: 40

Brand: REXROTH Pages: 86

Brand: Daewoo Pages: 188

Brand: BGS technic Pages: 8

Brand: Chamberlain Pages: 20

Brand: Chamberlain Pages: 28

Brand: Louvolite Pages: 4

Brand: Dertec Pages: 2

BREVINI T Series

Brand: DANA Pages: 46

BREVINI E 100 Series

Brand: DANA Pages: 50

Brand: Volvo Penta Pages: 176

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands