Paccar PX 8 Page 87 Operator'S Manual Download | Manualshive

Page: 87 / 94

background image

WARRANTY

PACCAR

Y53-1030A 12/09

– 81 –

California Emission Control System
Warranty, On-Highway

Products Warranted

This Emission Control System Warranty applies to diesel
engines (hereafter, engines) certified with the California Air
Resources Board beginning with the year 2009, marketed by
PACCAR, and registered in California for use in on-highway
applications.

Your Warranty Rights and Obligations

The California Air Resources Board and PACCAR Inc are
pleased to explain the emission control system warranty on
your 2009 and subsequent model year diesel engine. In Cal-
ifornia, new motor vehicle engines must be designed, built
and equipped to meet the State's stringent anti-smog stan-
dards. PACCAR must warrant the emission control system
on your diesel engine for the periods of time listed below pro-
vided there has been no abuse, neglect or improper mainte-
nance of your diesel engine.

Your emission control system may include parts such as the
fuel injection system and engine electronic control module.
Also included may be hoses, connectors and other emission
related assemblies.

If an emission-related part on your engine is found to have a
defect in material or factory the part will be repaired or
replaced by PACCAR. This is your emission control system
defects warranty.

Manufacturer's Warranty Coverage

This warranty coverage is provided for five years or 100,000
miles (160,935) km or 3,000 hours of engine operation,
whichever first occurs from the date of delivery of the engine
to the first purchaser. Where a Warrantable Condition exists,
PACCAR will repair your engine at no cost to you including
diagnosis, parts and labor.

Owner's Warranty Responsibilities

As the engine owner, you are responsible for the perfor-
mance of the required maintenance listed in your PACCAR
Operator's Manual. You are responsible for presenting your
engine to an authorized PACCAR Dealer or an authorized
Cummins Distributor as soon as a problem exists. The war-
ranty repairs should be completed in a reasonable amount of
time, not to exceed 30 days.

PACCAR recommends that you retain all receipts covering
maintenance on your engine, but PACCAR cannot deny war-
ranty solely for the lack of receipts or for the failure to ensure
the performance of all scheduled maintenance.

«
...
85
86
87
88
89
...
»

Summary of Contents for PX 8































































































Reviews:

No comments

Related manuals for PX 8

Brand: Wartsila Pages: 168

IE3-K11R 132S 4 Ex e IIC T3

Brand: VEM Pages: 16

MAESTRIA+ 50 io

Brand: SOMFY Pages: 112

Compact CA Series

Brand: Hägglunds Pages: 45

Brand: MTU Pages: 239

Brand: Man Pages: 50

Brand: Toyama Pages: 48

Brand: Lister Petter Pages: 88

Brand: Amewi Pages: 20

Allen-Bradley MP-Series

Brand: Rockwell Automation Pages: 68

Brand: Wood-mizer Pages: 197

Brand: Hirth Pages: 33

Brand: SKY Engines Pages: 26

Brand: Ford Pages: 173

Brand: Rotax Pages: 102

Brand: Rotax Pages: 184

Brand: Nanni Pages: 191

Brand: Perkins Pages: 82

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands