Paccar PX 8 Page 49 Operator'S Manual Download

Page: 49 / 94

Operating Instructions

PACCAR

Y53-1030A 12/09

– 43 –

interfere with onboard communication equipment or with the
vehicle's ability to meet any applicable EMI standards and
regulated specifications.

If an int erfe re nc e c on dit io n is ob se r ved , fo llow th e
suggestions below to reduce the amount of interference:

1. Locate the receiving antenna as far away from the

engine and as high as possible.

2. Locate the receiving antenna as far away as possible

from all metal obstructions (e.g., exhaust stacks).

3. Consult a representative of the accessory supplier in

your area to:

• Calibrate accurately the device for proper frequency,

power output, and sensitivity (both base and remote
site devices must be properly calibrated)

• Obtain antenna reflective energy data measure-

ments to determine the optimum antenna location

• Obtain optimum antenna type and mounting

arrangement for your application

• Make sure your accessory equipment model is built

for maximum filtering to reject incoming electromag-
netic noise.

Summary of Contents for PX 8































































































Search results

Summary of Contents for PX 8

Reviews:

Related manuals for PX 8

Brands by name

Popular brands

Paccar PX 8, Operator'S Manual

Search results

Summary of Contents for PX 8

Reviews:

Related manuals for PX 8

Brands by name

Popular brands