NEVER disconnect the high-pressure hose from the pump or spray gun while the system is
pressuri
s
ed. Relieve pressure by squeezing the spray gun trigger after the engine has been
turned OFF.
4.1. Before stopping/shutting down the machine allow the engine to cool down for a few
minutes, by allowing it to run
at low speed
.
4.2. You MUST allow the engine to come to a full stop before carrying out any
maintenance on the machine.
4.3. To stop the machine.
Turn engine switch to the OFF position
. Turn the water supply OFF.
Operate the spray gun trigger to release system pressure. Remove the garden hose and pressure hose.
Remove nozzle from spray gun. Check that the fuel valve is in the OFF position.
If detergents were used, remove detergent injector tube from the pump.
You MUST allow the engine to cool for at least five minutes before storing, a hot engine is a fire hazard.
4.
STOPPING – SHUTDOWN PROCEDURE
Page 15
First edition -
April
201
7
