48
SRM Setup Mode |
Copyright © P Squared Ltd 2013
Once you have selected the settings ‘page’ that you need, you can start to alter the settings within
that page using the information below.
Available Settings
Once you have selected the ‘page’ that you want, you can start to alter the settings on that ‘page’.
The section below shows the settings that are available on each page.
In all cases, there is one or more buttons that are used both to select the appropriate mode and also
to display the currently selected mode. The buttons are used to step through the available modes
and the current mode is displayed by the button flashing the appropriate amount of times, pausing
briefly and then repeating the flash pattern.
So for example, the Mic/Line button on the SRM is used to select the mode for the Microphone /
Line channels (on settings ‘page’ 1). If it is flashing twice, then pausing before flashing twice again
then mode 2 is selected. Pressing the button would move it on to mode 3 and the flash pattern
would alter to flash three times before pausing.
Listed below are all the available settings ‘pages’ and the options available within those pages.
Settings Page 1 - Input Select Modes
Mic / Line Channels 1-4 – Mic/Line button selects/indicates current mode
Mode 1 - Mic & Line available for selection (default)
Mode 2 - Phantom Mic & Line available for selection
Mode 3 - Mic only
