SRM Operations Manual
39
SRM Setup Mode |
Copyright © P Squared Ltd 2013
To counter this variation in phone lines, the SRM includes adjustment for Resistance and
Capacitance of the telephone interface to allow you adjust these characteristics.
In order to adjust these settings, you need to connect to SRM to a dummy telephone line that
emulates a BT line. You can then alter the settings to fine tune to electronic balance of the system.
We can supply a simple circuit that you can build to do this but it is recommended that is left to a
professional engineer.
SRM Setup Mode
The SRM comes pre-setup for most common applications but there are a number of additional
programming options that can be adjusted to meet your individual needs.
The SRM can be setup using a combination of buttons on the mixer to enter the special Setup Mode,
and once in Setup Mode, additional button combinations can be used to adjust the mixers basic
programming.
Please Note:
We do not recommend that you use Setup Mode unless advised to by P Squared. We
also recommend that you do not attempt to reprogram your SRM until you are fully familiar with the
procedures outlined below.
Never unplug your SRM while reprogramming the system as it could lead to
permanent damage to the hardware and require a return to P Squared for repair.
