34
Using The Telephone Interface |
Copyright © P Squared Ltd 2013
Procedure For Making A Call And Routing It Through The Mixing Desk
1.
Use the TEL/Aux button on the TEL/Aux channel (channel 9) to select Telephone Interface
mode. The button should not be illuminated when in Telephone Interface mode.
2.
Pickup the telephone handset and dial the number you wish to call.
3.
Once the person you have called has answered you can use the handset to talk to them if
you wish.
4.
When you are ready to transfer them to the SRM, pull down the TEL/Aux fader and press the
PREFADE & TB button. This will allow you to hear the person on the phone and for them to
hear you but for it to not be broadcast via the PGM or REC bus outputs.
This will also automatically activate the LINE HOLD button (at the bottom of the channel)
which will connect the phone call to the SRM. The LINE HOLD button will also illuminate to
show the call is connected.
