SRM Operations Manual
37
Using The Telephone Interface |
Copyright © P Squared Ltd 2013
Steps 1 to 6 – As above
7.
With both the TEL/AAU and Microphone Channel 1 faders fully down, deselect the PGM
Button (light should be off) and make sure the REC Button is selected (light should be on).
In this configuration, the output from the Microphone 1 Channel and the TEL/Aux Channel
will be sent to the REC Output bus (which Myriad is using for recording) but not to the PGM
Output bus (which is feeding your live output).
Obviously if you need to use any other channels (like guest mic etc) then you should set
them up the same.
Important:
Make sure the REC button is de-selected (not illuminated) on all channels that
you do not want to include in your recording (including the channels that are playing ‘on-
air’).
8.
You will also need to press the REC button in the Monitoring section. This will switch both
the LED Meter display and the selected speakers and headphones to ‘listen’ to the REC
Output Bus (and not what you are broadcasting using the PGM Output Bus.
