OXE 30-0100-125, Service Manual

Page: 60 / 260

60
OXE 150/200 HP SERVICE MANUAL
FUEL INJECTION PUMP REPLACEMENT
3.
Detach the hoses on the high-pressure pump:
- Plug all connections with plugs.
- Release the clamp and detach the fuel supply hose (1) from the high
pressure pump. Plug the hose.
-
Unplug the fuel pressure sensor connector
(3)
from the high
pressure pump.
- Detach the high-pressure fuel line (5) . Plug the nozzle pipe.
NOTE!
Have a cloth on hand to catch any fuel spill.
NOTE! When affixing the pulley, use two hex socket head screws M6 X 40
(30 mm unthreaded and 10 mm thread). The screws must be tightened the
whole length of the thread. This way the pulley is prevented from moving out
of position.
4.
Remove the pulley nut:
-
Turn the engine so it is possible to fit 2 Allen bolts
(1)
M6 x 40 (30 mm
unthreaded and 10 mm threaded) through the holes in the pulley and to
threads in the high-pressure pump bracket.
- Remove the pulley nut (2) .