OXE 30-0100-125, Service Manual

Page: 24 / 260

24
OXE 150/200 HP SERVICE MANUAL
SPECIFICATIONS
FASTENER TIGHTENING SPECIFICATIONS
Application
Specification
Metric Imperial
Camshaft Sprocket Bolt 130 Nm 96 lb ft
Camshaft Cap Bolt 25 Nm 18 lb in
Camshaft Housing Bolt 25 Nm 18 lb ft
Camshaft Intermediate Drive Sprocket Bolt
- First Pass 30 Nm 22 lb ft
- Final Pass 52 degrees
Camshaft Position Actuator
Camshaft Bolt 9 Nm 80 lb in
Camshaft Position Sensor Bolt 9 Nm 80 lb in
Exhaust Manifold Nut 25 Nm 18 lb ft
Connecting Rod Bolt
- First Pass 25 Nm 18 lb ft
- Final Pass 60 degrees
Coolant Outlet Bolt 9 Nm 80 lb in
Crankshaft Balancer Bolt 25 Nm 18 lb ft
Crankshaft Increment Wheel Bolts 12 Nm 106 lb in
Crankshaft Rear Oil Seal Bolt 9 Nm 80 lb in
Crankshaft Sprocket Bolt 340 Nm 251 lb ft
Crankshaft Main Bearing Bolt – Inner
- First Pass 25 Nm 18 lb ft
- Final Pass 100 degrees
Crankshaft Main Bearing Bolt – Outer
- First Pass 25 Nm 18 lb ft
- Final Pass 100 degrees
Crankshaft Main Bearing Bolt – Side
- First Pass 25 Nm 18 lb ft
- Final Pass 100 degrees
(1) = Use new fastener.