8.Specification
69
(load defaults to 50Ω)
1mVpp to 5Vpp (≤ 30MHz)
Bandwidth flatness (relative
to 100 kHz Sine wave, 1 Vpp,
50Ω)
≤10MHz: ±0.2dB
≤30MHz: ±0.3dB
Amplitude accuracy
± (1% of s 1 mVpp) (1kHz sine,0V offset, >10mVpp)
Amplitude resolution
0.1mVpp or 4 digits (The amplitude ≥ 1Vpp is 1mVpp)
DC offset range
(High resistance)
± (10 Vpk – Amplitude Vpp / 2)
DC offset accuracy
± (1 % of |setting| + 1 mV + amplitude Vpp * 0.5%)
Offset resolution
0.1 mVpp or 4 digits (The amplitude > 1 Vpp is 1 mVpp)
mVpp, Vpp, Vrms, mVrms, dBm
Output Impedance
50Ω (Typical)
Output protection
Short circuit protection, the output will be automatically turned
off when overloaded
Signal Characteristics
Signal Characteristics
Sine
Harmonic distortion
Typical (0dBm)
DC to 1MHz: <-65dBc
1MHz to 10MHz: <-60dBc
10MHz to 30MHz: <-55dBc
Total harmonic distortion
< 0.05 %, 10 Hz to 20 kHz, 1 Vpp
Non-harmonic distortion
Typical (0dBm)
≤10MHz: <-70dBc
>10MHz: <-70dBc + 6dB/
sound interval
Phase noise
Typical (0dBm, 10kHz offset)
10MHz: ≤-110dBc/Hz
Square
Rise/fall time
< 8ns
Jitter (rms), typical (1Vpp, 50Ω)
≤5MHz: 2ppm + 300ps
>5MHz: 300ps
Overshoot
Typical (100 kHz, 1 Vpp) < 3%
Duty cycle
50.00% (fixed)
Ramp
Linearity
< 0.1% of peak output
(typical 1 kHz, 1 Vpp, symmetry 50%)
Symmetry
0.0% to 100.0%
Pulse
Period
66.667 ns to 1000 ks
Pulse Width
≥ 18ns
Duty cycle
0.1% to 99.9% (limited by the frequency setting)
Rise and fall time
≥ 8ns (limited by the pulse width setting)
