5.Panel Operation
17
Set the rising/falling time
Press the
Rising/Falling
softkey, the chosen menu item is highlighted. Press the
Rising/Falling
softkey to switch between Rising Time and Falling Time. In
Parameter
6
of Figure 5-6, a blinking cursor appears in the parameter value. Turn the
knob
to
change the value directly, or use the
numeric keypad
to input the desired value and
choose the unit.
Output Noise Wave
The noise wave which the generator output is white noise. Press
, the screen
displays the user interface of the noise wave. The Noise waveform parameters can be
set by operating the Noise setting menu on the right.
The noise wave has no frequency and periodic parameters.
The noise wave menu includes:
Amplitude/High Level
,
Offset/Low Level
.
To set the Amplitude/High Level, Offset/Low Level, please refer to
on page 10.
Figure 5-8: Noise wave user interface
Output Arbitrary Wave
Press
, the screen displays the user interface of the arbitrary wave. The
Arbitrary waveform parameters can be set by operating the Arbitrary setting menu
on the right.
