5.Panel Operation
58
(1)
Press the front panel
Store
function key to enter the file system.
(2)
Select INTER under the memory selection interface, and then press the
Arb file
softkey.
(3)
Press the
Secure
softkey, the screen pops up, and then press the
OK
softkey to
erase all waveforms stored in internal memory.
Save/recall Instrument Settings
The instrument settings can be saved as files in internal memory. Up to 16 instrument
settings can be saved in the instrument internal memory. The saved settings can be
restored from files in the internal memory.
Operation Step:
Press the front panel
Store
function key to enter the file system.
If you want to save the settings to the internal memory, select INTER and press
the
Set File
softkey. Turn the knob to select a Setup file and press the
Save
softkey. (The file size is displayed on the right side of the Setup file. If 0B is
displayed, it means the file is empty.)
Note: Press the
Secure
softkey, and then press the
OK
softkey to clear all the
settings in the internal memory.
To recall a setup, select the desired setup, and press the
CallOut
softkey.
Preset Settings (Preset)
Sets the reset setting or power-on setting of the generator.
Restore to the factory setting
(1)
Press the front panel
Preset
function key to enter the preset menu.
(2)
Press the
ResetSet
softkey to select
Factory
.
(3)
Press the
Reset
softkey, and then press the
OK
softkey to restore the generator
to the factory default settings.
Table 5-1: The factory default settings
Output Configuration
Factory Setting
CH1 signal output switch
Off
CH2 signal output switch
Off
Function
Sine
Frequency
1 kHz