4.Quick Start
8
User Interface
Figure 4-3: User Interface
1
Display channel name and channel switch status
2
Current waveform or current mode
3
Trigger source
Internal: Internal modulation or internal trigger source
External: External modulation or external trigger source
Manual: Manual trigger source
4
Load, High Z indicates high resistance
5
This indicator is lit when the network is connected through the LAN
interface.
6
Lights up the indicator when connected to the USB Host via the USB
DEVICE interface.
7
When the instrument detects the USB flash drive, it lights up the
indicator.
8
Current menu name
9
Current waveform or mode setting menu
10
Counter brief information showing frequency value, period value and
duty cycle
11
Display current waveform
12
Start phase
13
Offset / low level, depending on the right highlighted menu item
14
Amplitude / high level, depending on the right highlighted menu item
15
Frequency/cycle, depending on the highlighted menu item on the right
