Owon SDS-E Series, User Manual

Page: 54 / 106

5.Advanced User Guidebook
49
Figure 5-35 Waveform Save Menu
The description of the Save Function Menu is shown as the following table:
Function Menu Setting Description
Type
Wave
Setting
Image
Record
CutWave
Choose the saving type.
About the
Record type, see " How to
Record/Playback Waveforms " on P57.
About the CutWave type, see “ How to Cut
and Recall a waveform ” on P55.
When the type is Wave , the menu shows as following:
Source
CH1
CH2
Math
Choose the waveform to be saved.
Object & Show
Object 1 - 15
Choose the address which the waveform is
saved to or recall from.
Show
ON
OFF
Recall or close the waveform stored in the
current object address. When the show is
ON, if the current object address has been
used, the stored waveform will be shown,
the address number and relevant
information will be displayed at the top left
of the screen; if the address is empty, it will
prompt "None is saved".
Save
Save the waveform of the source to the
selected address. Whatever the
Type of
save menu is set, you can save the
waveform by just pressing the
Copy panel
button in any user interface. Storage format
is BIN.
Storage
Internal
External
Save to internal storage or USB storage.
When External is selected, save the
waveform according to the current record
length (see "
Record Length Menu
" on P43);
the file name is editable. The waveform file
could be open by OWON waveform
analysis software (on the supplied CD).
When the type is Setting , the menu shows as following:
Setting
Setting1…..
Setting8
The setting address
Save
Save the current oscilloscope setting to the
internal storage