HDS2062M-N Handheld DSO & DMM 5-Using the Oscilloscope
2.
Auto measurement window 1, in which “f ”means frequency, “T” means cycle, “V” means
the average value, “Vp” the peak-peak value and “Vk” the root-mean-square value.
3.
Auto measurement window 2.
4.
The pointer indicates the horizontal triggering position.
5.
This reading gives the Time Difference between the horizontal triggering position and the
screen centerline. It reads zero when the pointer is in the center of the screen.
6.
The trigger state indicates the following information.
Auto:
The oscilloscope is working in the automatic mode and displaying the waveform
under the non-trigger state.
Trig’d:
The oscilloscope has detected a trigger and collecting the information generated
after the trigger.
Ready:
All pre-triggered data have been captured and the oscilloscope has been ready to
receive trigger signals.
Scan:
The oscilloscope can gather and display the waveform data continuously in scanning
mode.
Stop:
The oscilloscope has stopped collecting the waveform data.
7.
Red and blue index display triggers vertical position during alternate trigger and triggers
index become green when it reaches edge trigger or video trigger.
8.
A hidden-style menu: With the
MENU
key pressed, you can view or hide the menu.
9.
Menu setting options: There are different setting options for different menus.
10.
It reads the value of trigger voltage level.
11.
The display shows the trigger signal source.
12.
The reading gives the value of primary time base.
13.
These graphics present the coupling modes of channel 2(CH2). The graphic “
～
” indicates
AC, the graphic “
－
” indicates DC.
14.
This reading shows the vertical Voltage Unit Scale of CH2.
15.
These graphics show the coupling mode of CH1, among which the graphic “
～
” express
indicates AC, the graphic “
－
” indicates DC.
16.
This reading shows the vertical Voltage Unit Scale of CH1.
17.
The blue pointer gives the grounding datum point of the waveform on CH2, which is the zero
position of CH2. No display of this pointer indicates that the channel has not been opened.
18.
OPTION operation prompt: There are different prompts for different OPTION operations.
19.
The red pointer gives the grounding datum point of the waveform on CH1, which is the zero
10
