HDS2062M-N Handheld DSO & DMM 6-Using the Multimeter
Figure 21: Diode Measurement
6.4.3 On-off Test
To perform an On-off test, do the following:
1. Press
the
R
key and
R
appears on the top of the screen.
2. Press
the
SET
key till the following is shown on the screen.
3.
Insert the black lead into the
COM
banana jack input and the red lead into the
V/
Ω
/C
banana jack input.
4.
Connect the red and black leads to the test point. If the resistance value of the tested point is
less than 50
Ω
, you will hear beep sound from the test tool.
Now, you can see a screen that looks like the following figure 22.
Figure 22: On-off Test
6.4.4 Measuring Capacitance
To measure a capacitance, do the following:
27
