19
"Multidis SH"
Transport and storage
140725280-V03.01.2020
4.1 Ball valve
Illustr. 4: Dimensions ball valve in mm
Item no.
Size
D
L1
L2
1406383
DN20
G¾
55 mm 57 mm
1406384
DN25
G1
80 mm 60 mm
1406483
(with thermo-
meter)
DN20
G¾
73 mm 60 mm
1406583
(with thermo-
meter)
DN20
G¾
73 mm 60 mm
1406484
(with thermo-
meter)
DN25
G1
85 mm 60 mm
1406584
(with thermo-
meter)
DN25
G1
85 mm 60 mm
- The ball valves item no. 1406483
and 1406484 have a red T-handle
which shall mark the supply pipe.
- The ball valves item no. 1406583
and 1406584 have a blue T-handle
which shall mark the return pipe.
The length with installed ball valve is
obtained by adding the length of the
stainless steel distributor/collector
"Multidis SH" (L) and the length of the
ball valve (L1).
4.2 Heat meter
Standard heat meters G1 and G¾ can be
installed.
The dimensions of the heat meter
can be obtained from the heat meter
manual.
5. Transport and storage
Transport the product in the original packaging.
Store the product under the following
conditions:
Temperature
range
-20°C to +60°C
Relative
humidity of air
max. 95%
Particles
Dry and free from dust
Mechanical
influences
Protected from
mechanical agitation
Radiation
Protected from UV-rays
and direct sunlight
Chemical
influences
Do not store together
with solvents, chemicals,
acids, fuels and similar
6. Installation
The brackets allow for the fixing of the
distributor/collector onto the wall.
1.
Mount the the flow distributor and the
return collector into the sound-absorbing
brackets.
2. Fix them onto the wall or in the cabinet.
The supply and return pipe can be
connected from either the left or right
hand side.
