Trouble shooting and Diagnostics
5-9
5.5
Print-related Problems
S
Print faint or of poor quality.
S
Have you used the correct paper? See section
6 Technical Data
which
contains a full specification of the paper you can use. Replace the paper if
it does not match with the specification.
S
Make sure that the ribbon is stretched correctly.
S
Does the ribbon need changing? Replace it with a new ribbon if necessary.
S
Is the ribbon cassette properly installed? Adjust as necessary.
S
Characters do not print evenly or are not uniform in pitch
S
Examine the paper path for dirt or other obstruction that may cause the
gap between print head and platen to vary. Remove the obstruction.
S
Print lines overlap
S
Examine the paper path for dirt or other obstructions that may prevent the
platen from rotating freely. Remove the obstruction.
S
On preprinted forms, the printing on the copies is not aligned with the
preprinted matter
S
Refer to section
3.4 Vertical Positioning VERT.POS.ADJ.
S
Part of printed text is missing (loss of data)
S
If you are using Serial communications check the buffer control setting in
Set-up.
S
Check the data flow control setting on the host computer.
Summary of Contents for CI-4070
