Output Solutions CI-4070, User Manual

Page: 80 / 227

Trouble Shooting and Diagnostics
5-2
5.1 Power-related Problems
S
Power indicator does not come On when power is switched On
S
Check that the power cord and plug are securely fitted to the printer and to
an electrical outlet.
S
Ask for the power connector connections (and fuse, if fitted) to be verified.
S
Ask for the building electrical supply to be verified.
5.2 Error Messages
After switching the power ON the printer runs a self test. During the test the
following messages may be shown on the display:
Display That means... Cause
No information, No power
S
Mains cable not connected
POWER ON indi-
cator not lit.
green and yellow hang up in reset
S
Print PSU defective
LED give light after power on
S
Print CU-DEV defective
but no reaction
#######
Firmware does not
S
PM not inserted
work
S
PM not correctly inserted
S
no firmware on PM
S
PROMs not correctly
installed
TEST.... Initializing of the
S
After first POWER ON with
(flashing) EEPROM PM
S
Change of PM
S
Contents of the EEPROM
faulty
I/O OK EEPROM located on EEPROM
the Control Unit not
S
not installed
addressable
S
not correctly installed
S
defective