Getting Started
1-8
5. Position the ribbon feed guide (13) between the print head (11) and the green
plastic plate (15).
6. Fit the upper mounting pins into the green mounting brackets and gently
move the cassette toward you until you hear a click on both sides. Swing the
ribbon underneath the print head until the lower mounting pins also engage
with a click on both sides. The audible clicks indicate that the mounting pins
have engaged properly.
Note:
At each end of the ribbon cassette there are two pins [1.] and [2.]
which keep the cassette in position when mounted. When installed
correctly the ribbon cassette IS NOT PARALLEL to the printer's
housing.
7. Move the print head (11) back and forth to settle the ribbon in the correct
position.
8. If necessary remove excess ribbon slack by turning the green knob (14)
clockwise.
9. Close the top cover (6) and press
.
Summary of Contents for CI-4070
