Trouble shooting and Diagnostics
5-7
5.3
No Printout
S
Self-test printout does not start
S
Make sure that you have closed the cover.
S
Check if paper is loaded in the printer.
S
Refer to section
1.8 Test Prints
.
S
Printing does not start
S
Make sure that the
READY
or
BUSY
message is displayed. If there is a
different message displayed please refer to the above error message
table.
S
Make sure that the printer is connected to the host computer. (Refer to
section
1.9 Connection to a Computer
). Make sure that connectors are
properly fixed at both ends.
S
Make sure that the printer is receiving data from the host computer.
S
Make sure that the correct protocol is enabled. (Refer to section
3.2
Standard Configuration
and Appendix
A Interface Description
)
S
Make sure that you have selected the correct port (if the automatic feature
has not been selected).
S
Make sure that paper is loaded.
S
Make sure that the ribbon is installed.
S
Examine the ribbon path. Does the ribbon pass in front of the whole
printhead? Adjust the ribbon if necessary.
S
Fanfold paper in lower or upper tractor does not advance
S
Make sure that the right tractor is selected.
Summary of Contents for CI-4070
