37.
Position the
Rear Gable Wall
on top of the
Rear Top Plate.
The rear gable framing should sit flush with the inside
of the top plate. It should also be centered sideways
on the top plate.
Hint:
use a square to check the angle of the gable
framing and top plate. Both angles should line up.
Adjust gable accordingly. Temporarily attach to walls
and Top Plate with 2 - 2” screws. Gables may need
slight adjustment in
Step 51.
Complete attachment in
Step 51
and additional 6 - 2” screws. Screw from the
bottom of gable framing down into Top Plate and
Wall.
39.
Position the
Middle Gable Wall
on top of
front top plate. Middle gable has cedar siding on
the front that is cut flush with gable framing. Once
again, the framing of the gable should be flush with
outside of plate and be centered sideways on the
plate.
When in correct position, attach with 2 -2”
temporary screws as per
Step 37.
Later
in
Step 51,
complete attachment after
Gables are correctly aligned with 6 more
2” screws.
38.
Locate both Middle Gable Walls and attach together as per
Step 33.
Siding is
flush with
framing
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 16
Gable Notch
