Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 13
27.
To complete the Porch Rail Section, the porch
sections must be assembled on level ground first.
There are 2 sections.
A . Attach 1x4
Top Plate Front Extension (34 1/2”L)
to 4x4 Porch Post with 2 - 1 1/2” screws. Make sure
support is flush with post.
B. Attach 1x4 1/2”
Wall Trim/ Supports
to Front
Extension using 2 - 1 1/2” screws. Make sure Front
Extension is Flush to back of wall trim and centered
1/2” on each side. Note: there are 2 different wall
supports for left & right.
C. Attach both
Corner Brackets
with 3 - 1 1/2” screws
from Front Extensions into Brackets. Attach Brackets to
Porch posts. Drill Pilot hole in bracket first.
D. Attach
Hand Rail
to complete your Porch Rail
Section. Handrail should start 4” from
bottom of Post and be centered on Post. On Wall trim
side, handrail should sit approx. 1” in from outside of
Wall trim. Use 3 - 1 1/2” screws to attach.
Top Plate
Front Extension
A.
B.
C.
Handrail
equally
spaced on on
Wall Trim
Support and
Porch Post.
Attach with 3
1 1/2 screws.
Hand
Rail
D.
Front Porch
Wall Trim
Supports
with
Filler Strip
attached.
Door and
Window Side
configurations
are unique.
Hand Rail
Section
4x4
Porch
Post
Exploded
View of
Porch Rail
Section
Corner
Bracket
Bracket centered
on post
Window Side
2 1/2” Filler
Strip on rear of
Wall Trim
Support.
4x4
Porch
Post
4”
3 - 1 1/2”
screws
3- 1 1/2” screws
Door Way Side
4 1/2” Filler Strip
on rear of Wall
Trim Support.
4 1/2”
2 1/2”
Plate Centered
on 4 1/2” trim.
2- 1 1/2”
screws
Front
2- 1 1/2”
screws
Important:
Drill Pilot
Holes to
prevent wood
from splitting!
Porch
Post
2- 1 1/2”
screws
Rear View
