76.
Position
Back Facia
(angle cut on ends) and
Side Facia
(square cut ends) in corner. Line
Facia up so square cut Facia is positioned between angled cut facia. Attach angled facia to batten
ends with 8 - 1 1/4” finishing nails per piece. Gap where facia boards come together at peak will be
covered in
Step 78.
Do a dry run using Facia to help you correctly position before attaching.
77.
Attach
Side Facia
to roof rafter ends. There are 2
facia pieces per side. Secure with 8 - 1 1/4” finishing nails
per piece. See Step 82 for final facia attachment
78.
Attach
Pentagon Detail Plate and 3 Facia /Trim Detail Plates
to cover seam where Facia
pieces come together. Also use a Trim Detail Plate to cover the seam where the Horizontal Trim
above the door and window come together. Secure with 4 - 1 1/4” finishing nails per piece.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 30
Side Facia
Angle
Cut
Back
Facia
Side
Facia to run 5/8” past
end of Roof Batten. Use
Gable Facia to help you
align correctly
