background image

BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · [email protected] · www.bega.com

40.16  ·  Technische Änderungen vorbehalten  ·  Technical amendments reserved  ·  Modifications techniques réservées

IP 55

!

Anschlusskasten
Connection box
Boîte de connexion

71 601

2

55

55

65

65

23

0

23

0

24

5

24

5

 

Gebrauchsanweisung

Instructions for use

Fiche d’utilisation

Anwendung

Anschlusskasten für den Einbau in Lichtmaste.

Application

Connection boxe for installation in luminaire 
poles.

Utilisation

Boîte de connexion

 

à installer dans le mâts.

Produktbeschreibung

Anschlusskasten gemäß  
DIN 43 628/ VDE 0660 · Teil 505
Gehäuse besteht aus  
schlagzähem Kunststoff
Brandschutz nach UL94-V2
Gehäusedeckel mit Schraubbefestigung
2 Befestigungslanglöcher ø 6,5 mm
Abstand 232 mm
für den Einbau in Maste ø > 70 mm
Türgröße ab 65 x 250 mm
3 Kabeleinführungen mit zweiteiliger 
Kunststoffdichtung und integrierter 
Zugentlastung für Erdkabel 5 x 4

@

2 Leitungseinführungen mit Dichtnippel für 
Leuchtenanschlussleitung 5 x 2,5

@

1 Sicherungshalter mit Schraubkappe  
für Schmelzsicherung Neozed D 01 bis 16 A  
mit eingesetzter Sicherung Neozed D 01  6 A
Schutzklasse II 

2

 

Schutzart IP 55 
Staubgeschützt und Schutz gegen 
Strahlwasser 

c

  – Konformitätszeichen

 

Gewicht: 0,2 kg

Product description

Connection box according to  
DIN 43 628/ VDE 0660 · Part 505
Housing made of impact synthetic plastic
Fire protection according to UL94-V2
Housing cover with screw mounting

2 elongated fixing holes ø 6.5 mm

Spacing 232 mm
for installation in poles ø > 70 mm
Door size from 65 x 250 mm
3 cable entries with two-part plastic gasket  
and integrated strain-relief for underground  
cable 5 x 4

@

2 cable entries with compression nipples for 
luminaire connecting cable 5 x 2,5

@

1 fuse holder with screw cap for fuse Neozed 
D01 up to 16 A  

equipped with fuse Noezed D01  6 A

Safety class II 

2

 

Protection class IP 55 
Dust-tight and protected against water jets 

c

  – Conformity mark

 

Weight: 0.2 kg

Description du produit

Boîte de connexion selon  
DIN 43 628/ VDE 0660 - Partie 505

Boîtier fabriqué en matière plastique 

 

résistant aux chocs

Protection contre le feu selon UL94-V2

Couvercle du boîtier vissé
2 trous de fixation diamètre ø 6,5 mm

Entraxe 232 mm
pour l'installation dans les mâts ø > 70 mm
Dimensions de la  porte 65 x 250 mm

3 entrées de câble avec joint en plastique en 

 

deux parties et collier anti-traction intégré pour 

 

câble réseau 5 x 4

@

2 entrées de câble de raccordement avec 

 

nipple d'étanchéité pour câble du luminaire 

 

5 x 2,5

@

1 porte fusible avec bouchon fileté pour fusible 

 

Neozed D 01 jusqu'à 16 A avec fusible intégré 

 

Neozed  D 01  6 A
Classe de protection II 

2

 

Degré de protection IP 55

 

Protection contre la poussière et les jets d’eau

 

c

  – Sigle de conformité

 

Poids: 0,2 kg

Sicherheit

Für die Installation und für den Betrieb 
dieses Anschlusskastens sind die nationalen 
Sicherheitsvorschriften zu beachten.
Der Hersteller übernimmt keine Haftung für 
Schäden, die durch unsachgemäßen Einsatz 
oder Montage entstehen.
Werden nachträglich Änderungen an dem 
Anschlusskasten vorgenommen, so gilt 
derjenige als Hersteller, der diese Änderungen 
vornimmt.

Safety indices

The installation and operation of this connection 
box are subject to national safety regulations.
The manufacturer is then discharged from 
liability when damage is caused by improper 
use or installation. 

If any connection box is subsequently modified, 
the persons responsible for the modification 

shall be considered as manufacturer.

Sécurité

Pour l’installation et l’utilisation de ce boîte de 

connexion, respecter les normes de sécurité 

nationales.

Le fabricant décline toute responsabilité 
résultant d'une mise en œuvre ou d'une 
installation inappropriée du produit.
Toutes les modifications apportées au boîte 
de connexion se feront sous la responsabilité 
exclusive de celui qui les effectue.

Reviews: