Outdoor GreatRoom Company BCH-1242, User Manual

Page: 7 / 26

Page | 7 www.outdoorrooms.com BCH-1242 42477 REV A
B. Design and Installation
Considerations
When planning an appliance installation, it is
necessary to determine the following information
before installing:

Where will the appliance be installed?
-
See Section 3: Appliance Clearances

Gas supply piping
-
See Section 4: Gas Setup and
Information
C. Tools and Supplies
Required
Before beginning the installation and setup of the
appliance, be sure that the following tools and
supplies are available:

Gloves

Safety Glasses

Two (2) Adjustable Wrenches

Utility Knife

Crowbar

Hammer

Non-corrosive leak-check solution
D. Inspect the Appliance
and Components
Once the necessary tools are gathered, every
element and component of the appliance shall be
inspected for damage before installation.
NEVER
install a damaged component. Report any damage to
the manufacturer.
Review the Limited One Year Warranty information
found at the end of this manual and the warnings on
Page 6.
E. Included Items
The following items are included with all Boreal
Complete Heat fire pit tables:

Three (3) bags of GFC-D glass media

Two (2) lift assistance straps

LP regulator hose (LP Models only)

Stainless steel flex-line for connection to
main gas supply
The following items are included only with Boreal
Complete Heat fire pit tables with Direct Spark
Ignition:

115 VAC/3.3 VDC Power Adaptor

CF-DSI Direct Spark Ignition System
Optional items for all Boreal Complete Heat fire pit
tables:

LED Light Kit (LIGHT-KT)

Glass Guard (GLASS GUARD-1242)

F. Additional Required
Items
The following item is required for operation on all
Boreal Complete Heat fire pit tables:

Outdoor rated extension cord
For manual ignition units, the following item is
required:

One (1) AAA battery for Piezo Sparker