Page | 23
www.outdoorrooms.com
BCH-1242 42477 REV A
B. Cleaning The Appliance
4. Inspect burner neck and orifice for obstruction.
c.
Disconnect appliance from gas and power
supply.
d.
Elevate unit using two (2) sawhorses (
Image
8.5
).
e.
Visually inspect burner neck and orifice for
obstructions (
Image 8.6
).
f.
Clear out obstructions with compressed air.
4.
Test the GFCI outlet for proper operation.
a.
With the appliance connected to power, turn
the fan control switch the ON position.
b.
Press the TEST button of the GFCI outlet inside
the appliance (
Image 8.7
). The fan should turn
off.
c.
Press the RESET button of the GFCI outlet and
the fan should turn back on (
Image 8.7
).
d.
If GFCI outlet fails to operate in this manner,
replace the GFCI outlet with the
manufacturer’s suggested outlet.
1.
Wipe decorative heat exchanger tubes with a
soft, damp cotton or microfiber cloth.
ONLY
USE WATER TO CLEAN HEAT EXCHANGER
TUBES
(
Image 8.8
)
.
2.
Remove glass media and clean in basin of
water mixed with dish soap. Allow to dry on a
towel.
3.
The glass fiber reinforced concrete (GFRC) top
(
Image 8.8.
) should be maintained in
compliance with the Supercast FAQ found at
www.outdoorrooms.com/support-faq.
4.
Use compressed air to remove any debris
from the burner surface and stucco base
(
Image 8.8
).
8.5
8.6
8.7
8.8
HEAT EXCHANGER TUBES
GFRC TOP
STUCCO BASE
