KIT CONTENTS
CONNECTIONS AND INSTALLATION
6
23
SUB-INCH
OUTBACKGUIDANCE.COM
OUTBACKGUIDANCE.COM
Sub-Inch Kit Contents
Unpack your REBEL Sub-Inch kit and identify the parts as shown.
752-0005-01
1
7" terminal
804-0155-0
1
A222 Smart Antenna
910-1064-000
1
eDriveXC autosteering controller
604-0015-000#
1
Terminal mounting hardware
• Round base (attach to terminal)
• Double socket arm mount
• Bar mount base with U-bolts/nuts
050-0020-01
1
LAN/USB cable
Connects LAN/USB port on terminal to
eDriveXC cable
6. Connect the implement's IBBC connector to the retrofit kit's
IBBC connector.
7. Attach the longer leads (at right) of the
power cable to the vehicle's battery.
8. Connect the positive ring terminal of the data/relay cable to "KEY
ON" of the vehicle's ignition switch so power is applied as you turn
on the switch.
Connecting to a Power Source
Using "REBEL Terminal Overview" on page 13 and "REBEL Connection Diagrams" starting on page 14 as guides,
connect the power adapter cable to your preferred power source.
Option 1: Connect to ignition switch
Negative
Positive
Signal Wire
Connects COM1 port on terminal to
switchbox, lightbar/AC110 cable, and
antenna cable
the power port on the REBEL terminal.
4. Coil excess cable in a protected location then secure the
installation with tie straps.
Negative
Positive
Negative
Option 2: Connect to battery
Part Number
Qty
Description
Photograph
1. Connect the red (+), black (-), and orange (IGN) leads of
terminal power adapter cable to a reliable 12 VDC power
source as follows:
050-0022-01
1
Power cable
Connects power port on terminal to power
adapter cable
Option 1: Connect to the ignition switch
—
connect red to
positive, black to negative, and orange to signal wire.
Option 2: Connect to the battery
—
connect red to positive, black
and orange to negative.
2. Connect the other end of the terminal power adapter cable to
the terminal power cable.
050-0043-01
1
COM1 cable
3. Route the terminal power cable into the cab for connection to
