OPTIONAL UPGRADES
CONNECTIONS AND INSTALLATION
8
21
OUTBACKGUIDANCE.COM
OUTBACKGUIDANCE.COM
Optional Upgrades
10” Terminal Kit Contents (optional)
Unpack your 10" terminal kit and identify the parts as shown.
752-0006-01
1
10" terminal
484-0003-01
1
Screen protector kit, 2 pk (10" terminal)
Lightbar Kit Contents (optional)
Unpack your lightbar kit and identify the parts as shown. See "Installing the Lightbar" on page 1 for instructions on
installing the lightbar in your preferred location.
806-1036-000#
1
Lightbar
604-0008-000#
1
Mounting ball
604-0019-000#
1
Suction cup mounting kit
Note: Use mounting ball 604-0008-000#
(above) in place of the mounting ball
included with this part (
X
at right)
a. Insert the 2-pin weather
pack closest to the
negative ring terminal into
the relay next to the power
posts on the IBBC bracket.
Apply enough pressure to
snap the plug into the
relay.
b. Insert the 2-pin weather
pack farther from the
negative ring terminal into
the relay near the IBBC
connector on the IBBC
bracket. Apply enough
pressure to snap the plug
into the relay.
c. Insert the large 4-pin
Deutsch connector into the
connector on the rear of
the IBBC connector. Apply
enough pressure to snap
the plug into the connector.
2. On the IBBC bracket remove
the nuts and washers from the
power posts then attach the
ring terminator from the data/
relay cable to the negative
power post.
Part Number
Qty
Description
Photograph
Part Number
Qty
Description
Photograph