6
There are two alternative ways to set the Ouflex M device IP address
and network settings:
1. IP address is retrieved via DHCP function. This requires that
DHCP service is in use in the network and network cables have
been connected.
2. IP address is set manually.
1. Request correct network settings (IP address, Gateway address,
Subnet mask, Nameserver address) from the network administra-
tor.
2. Go to “System settings” -> “Network settings” -> “DHCP” and
press
.
3. Select ”Off” and press
to accept selection.
4. Enter all network settings (IP address, Gateway address, Subnet
mask, Nameserver address) provided by the network administra-
tor.
5. Select ”Update network settings” .
System settings > Network settings
The Ouman Access service offers a secured connection to automati-
on equipment using the in-house internet connection. Buy equipped
with a data interface SIM card
Network settings
1. Go to DHCP and press
.
2. Select ”On” and press
to accept selection.
3. Select ”Update network settings” and press
to accept selec-
tion.
4. Wait approximately one minute.
5. The network settings are now assigned to Ouflex M by DHCP
server (new settings should appear automatically in the user in-
terface)
Otherwise check the network connections and ensure that
DHCP-server is available in the network.
Setting the IP address via DHCP function:
Setting the IP address manually:
1.3 Network settings
If you want to connect the Ouflex M unit to an Ethernet network,
you will need an Oulink Ethernet adapter (additional equipment).
Oulink Eth is connected to COM3 port (RJ-45) located in the side
of the controller. The maximum length of the RJ45 ethernet cable
between Ouflex M and Oulink is 10m and all 4 pairs must be con-
nected.
SMS PIN
Approve: Press and hold OK
Cancel: Press and hold ESC
Network settings
Network settings
System settings
RJ-45 сonnector to the Oulink
8
7
6
5
D
C
B
A
B
C
D
E
F
1
2
3
4
5
6
7
8
F
E
A
Date
Pages
Author
Designer
Scale
Document type
Document description
Item
Document code and revision
1/1
Modifier
Page size
1:1
A4
XL740-A-01
Printing color: RAL 9005 Jet Black
Drawing
OUFLEXMINI PRINTED COVER
09.06.2015
MM
--
--
XL740
9 10
11 12
13 14
15 16
17 18
19 20
C NO
C NO
C NO
C NO
C NO
C NO
1 2
3 4 5
6 7 8
24V ~/+
B2 A2
B1 A1
21
22 32 42
25
62 72 82 29 03 13 23 33 43 53 63
37
83 93 04
41
24 34 44
45
64 74 84 49 05 15 25 53 45 55 65
57
85 95 06
Y1
PWM
Y3
2Y
M5
4Y
M4
M3
M2
M1
M14
51
M
M12
31
M
M10
M11
M9
M8
M7
M6
Print1)
Print2)
Print3)
Time 17:01>
Date 17.01.2017 >
Day light saving In use >
Language English >
SMS settings >
Network settings >
Display settings >
Type info >
Lock code Not in use >
Backup >
DHCP Off >
Gateway adress 0.0.0.0 >
Subnet mask 0.0.0.0 >
IP address 0.0.0.0 >
Nameserver address 0.0.0.0 >
Update nework settings >
- - - - - - - - - - - - - - - - - - - - - -
FTP On >
Modbus TCP/IP gw >
Modbus RTU slave >
Modbus RTU master 1 >
SNMP >
Access On >
Access IP 0.0.0.0 >
- - - - - - - - - - - - - - - - - - - - - - - -
OULINK
Serial number
Device state Uninitialized>
WEB user interface On>
OPC UA Off >
OPC UA Portti 48010 >
<- -
DHCP Off >
Gateway adress 0.0.0.0 >
Subnet mask 0.0.0.0 >
IP address 0.0.0.0 >
Nameserver address 0.0.0.0 >
Update nework settings >
- - - - - - - - - - - - - - - - - - - - - -
Modbus TCP/IP gw >
Modbus RTU slave >
Modbus RTU master 1 >
SNMP >
Access On >
Access IP 0.0.0.0 >
- - - - - - - - - - - - - - - - - - - - - - - -
OULINK
Serial number
Device state Uninitialized>
WEB user interface On>
OPC UA Off >
OPC UA Portti 48010 >
<- -
