background image

17

Internet-based on-line control room

Communication via a mobile phone

Attention! If the controller has a device ID in use, always write the device ID in front of the key word

7 Remote use

If the controller has a device ID in use, always write the device ID in front 
of the key word (example. Ou01 KEY WORDS or Ou01 ?).

 Capital and small 

letters are different characters in the device ID!

The controller sends a list of key words as a text message that gives you in-
formation about the controllers’ functions and state. The key word is sepa-
rated by a /. You can write the key word using capital or small letters. Write 
only one key word per message. Store the key words into your phone’s 
memory.

If a GSM modem is connected to the Ouflex M you can communicate 

with the controller by text messages using command words. 

Send the following text message to the controller: KEY WORDS.

Key word

Explanation

?

Reply message shows all key words in the language that has been selected for the 
controller.

Key words

If the controller is set up in English, the regulator sends a list of key words.

Acitve alarms

The reply message will show all active alarms.

Alarm history

The reply message will show information about the latest alarms.

Internet-based on-line control 
room for professional remote  
control and monitoring (optional).

OUNET

Summary of Contents for Ouflex M





















Reviews: