9
NOTE! When you enter a locking code
when changing the default, the code
will not be required again until the unit
has been untouched for 10 minutes,
when the display goes into idle sta-
te. You can also set the display in idle
state by pressing the ESC button for a
long period of time.
1.4 Display settings
1.5 Type information
Type information shows the hardware and software versions. This in-
formation is useful especially in case of maintenance or upgrade.
System settings > Display settings
System settings > Type information
Type information
Serial number xxxxxxx
Application x.x.x
Device version x.x.x 2MB
Display x.x.x 2MB
Platform SW x.x.x 2MB
Contrast:
You can adjust the contrast of the display. If you wish the
display to be brighter, set a smaller numerical value. The setting ran-
ge is 50… 100. New setting is taken in use after confirmation is done.
External display:
The external display is connected to Ouflex M’s RJ12
connector. Use a Ouman special cable (LCD CAMBLE M).
1.6 Lock code
If you have taken lock code into use, you may change the code. The
factory setting of lock code is 0000.
System settings > Lock code
System settings > Change lock code
1. Ouflex M device asks you to enter the current code. The factory
setting of lock code is 0000.
2. Select number by using or -knob and press
to accept each
number. Press ESC to return to the previous square.
3. Press
for a number of seconds to accept the code.
Press ESC for a number of seconds to cancel.
System settings
Network settings >
Display settings >
Type info >
Lock code Not in use >
Lock code
In use
Not in use
Give lock code
0 0 0
0
Approve: Press and hold OK
Cancel: Press and hold ESC
When lock code is taken in use, it’s not possibel to change any set-
tings without entering lock code. It is recommended that you take lock
code into use if the device is located so that anyone could reach it
and change settings (e.g. deactivate burglar monitoring). Locking the
device and changing the lock code prevents unauthorized use of the
device.
TYPE INFORMATION
Send message: Type information.
The reply message will show informa-
tion about the device and software.
Lock code function
Description
Not in use
You can read Ouflex M device information and change settings.
In use
You can read Ouflex M device information but you can not change settings
without entering the lock code. The factory setting of lock code is 0000. If
you take lock code into use, change the code for security reasons.
8
7
6
5
D
C
B
A
B
C
D
E
F
1
2
3
4
5
6
7
8
F
E
A
Date
Pages
Author
Designer
Scale
Document type
Document description
Item
Document code and revision
1/1
Modifier
Page size
1:1
A4
XL740-A-01
Printing color: RAL 9005 Jet Black
Drawing
OUFLEXMINI PRINTED COVER
09.06.2015
MM
--
--
XL740
9 10
11 12
13 14
15 16
17 18
19 20
C NO
C NO
C NO
C NO
C NO
C NO
1 2
3 4 5
6 7 8
24V ~/+
B2 A2
B1 A1
21
22 32 42
25
62 72 82 29 03 13 23 33 43 53 63
37
83 93 04
41
24 34 44
45
64 74 84 49 05 15 25 53 45 55 65
57
85 95 06
Y1
PWM
Y3
2Y
M5
4Y
M4
M3
M2
M1
M14
51
M
M12
31
M
M10
M11
M9
M8
M7
M6
Print1)
Print2)
Print3)
RJ45-2
Display settings
Display version xxxxx
Contrast 75 >
External display In use >
